Should be assessed by an experienced health and safety professional, remediated by personnel with training and experience handling environmentally contaminated materials.

Analysis of
Environmental Samples
Microsope identification of the spore/colonies requires considerable expertise. The American Industrial Hygiene Association (AIHA) offers

accreditation to microbial laboratories. Accredited laboratories must participate in proficiency testing.

The following is summary of information regarding assessment and remediation of indoor fungi.

Many fungi (e.g. species of Aspergillis, Pencillium, Fussarium, Trichoderma and Memnoniella) can produce potent mycotoxins. Mycotoxins are fungal metabolites identified as toxic agents.

People performing renovations/cleanning of fungal contamination may be at risk for developing Organic Dust Syndrome (ODTS) or Hypersensitvity Pneumonitis (HP)

Building material supporting fungal growth must be remediated as rapidly as possible in order to ensure a healthy environment.

The purpose of air monitoring is to access the extent of contamination throughout the building. It's preferable to conduct sampling while ventilation systems are operating.

Air monitoring may be necessary if presence of mold is supected (e.g. musty orders), but can not be identified by a visual inspection or bulk sampling (e.g. mold growth behind/between walls).

If air monitoring is performed, for a company purpose, outdoor air samples should be collected concurrently at air intake, if possible at an area that is representative of outdoor air.

• Reduce indoor humidity (to 30-60%) to decrease mold growth by venting bathrooms, dryers and other moisture-generating sources to outside; using air conditioners and dehumidifiers; increasing ventilation; and using operating exhaust fans whenever cooking, dishwashing and cleaning.
• Clean and dry any damp or wet building materials and furnishing within 24-48 hours to prevent mold growth.
• Clean mold off hard surfaces with water, bleach and detergent and dry completly. Absorbent materials such as ceiling tiles, that are moldy may need to be replaced.

• Mold can be found almost anywhere; it can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, wallpaper, carpet and foods.

A division of EKIP Inc.
9524 Kearny Villa Rd. #1005F
San Diego, CA 92126
858-693-0051 / 1-800-670-0051
Fax: 858-693-3325

• No practical way to eliminate all mold and mold spores in indoor environment; the way to control moisture and ventilation.
• If mold is a problem in your home, school or business, you must clean up the mold and eliminate the source of moisture.
• Fix the source of water problems or leak to prevent mold growth.

• Prevent condensation; reduce the potential for condensation on cold surfaces (i.e. windows, piping, exterior walls, roof or floors) by adding insulation.
• In areas where there is a perpetual moisture problem, do not install carpeting (i.e. by drinking fountains, classroom sinks, wicking or frequent condensation

• Residential/Commercial Property Inspections
• Water, Radon and Cat Allergen testing

Call us with any questions you may have concerning environmental concerns

1-800-670-0051

1-858-693-0051